SÌ! Il tuo ordini si qualifica per la spedizione GRATUITA. Spedizione gratuita per ordini superiori a 300€.

Black Friday In arrivo

Nuovi arrivi

Scopri la nostra ultima collezione di accessori essenziali per la cucina! Scopri nuovi coltelli giapponesi, strumenti per affilare e vari accessori da cucina per chef. Migliora il tuo arsenale da cucina!

Hokiyama Sujihiki SLD Nashiji 240mm (9.5") is made from semi-stainless SLD steel that combines ease of maintenance with impressively long edge retention. The minimalistic blade finish is a combination of nashiji and matte migaki. Its length makes it perfect as a gift and for all those who prefer smaller mighty blades.

New

Hokiyama Sujihiki SLD Nashiji 240mm (9.5") - LAMA

Hokiyama Gyuto 440C Damascus in 210mm (8.3") blade length is the Japanese version of the classic Western Chef’s knife. It comes without a handle, so you can choose and fit your own! It's made from 440C stainless steel and is low maintenance—both in rust resistance and long-term edge retention. Makes a great gift!

New

Hokiyama Gyuto 440C Damasco 210mm (8.3") - LAMA

Anryu Petty Aogami #2 150mm comes from the boutique Japanese smithy Anryu Hamono. It is forged entirely by hand by Ikeda-san, so each piece is unique. The blade is without a handle so you can fit your own! This small knife, made from Aogami #2 steel (64 HRC), is the perfect tool for work in-hand and on a cutting board.

New

Anryu Petty Aogami #2 150mm (5.9") - LAMA

Nigara Sakimaru Sujihiki SG2 Kurouchi Tsuchime 270mm (10.6") [Ebony] is a traditional Japanese knife used for preparing meat and raw fish. It slices protein in one pulling motion, creating smooth, shiny cuts. Its SG2 powder steel core ensures long-lasting sharpness with little to no maintenance. A beast of a knife!

New

Nigara Sakimaru Sujihiki SG2 Kurouchi Tsuchime 270mm (10.6") [Ebony]

The Anryu Nakiri Aogami #2 165mm designed specifically for vegetables. It comes from the boutique Anryu Hamono with over 80 years of tradition. It is forged entirely by hand by Ikeda-san, the successor of the great master Katsushige Anryu, so each piece is unique. The blade is without a handle so you can fit your own!

New

Anryu Nakiri Aogami #2 165mm (6,5") - LAMA

Tsunehisa Petty AUS-10 Nami 150mm (5.9") is a small multi-purpose Japanese kitchen knife, suited for all smaller cutting tasks either in hand or on the cutting board. Made from AUS-10 stainless steel (62 HRC) that has great edge retention. The migaki damascus blade is fitted with an oak octagonal handle.

New

Tsunehisa Petty AUS-10 Nami 150mm (5.9")

Meet your new favorite power couple - The Carbons. The set consists of Yoshida Ajikiri 100mm (3.9") and Yoshida Santoku Funayuki 155mm (6.1"). Small yet fierce, these two hand-forged knives are made from high-carbon SUJ-2 steel (63-64 HRC), known for its fine sharpness, long edge retention, and ease of sharpening.

Salva 15%

I Carboni [Funayuki & Ajikiri SET]

208,25€ 245,00€

This Santoku Funayuki SUJ-2 blade is fitted with an octagonal rosewood handle with a cedar ferrule. Great for cutting smaller pieces of meat and filleting fish. The blade is forged from SUJ-2 steel, which offers incredible capacities, hardness is 63-64 HRC, and at the same time the knife is very easy to resharpen.

New

Yoshida Santoku Funayuki SUJ-2 Kuro-uchi 155 mm (6,1") [Rosewood-Cedar/Octagon]

A traditional Japanese handle in octagonal shape, made from rosewood with a cedar ferrule. Suitable for both left- and right-handed users. Combine the handle with any standalone blade to create your very own custom Japanese kitchen knife! Sizes S and M of traditional wa Japanese handle from rosewood and cedar available.

New

Manico giapponese - Palissandro / Cedro [octagonal]

This Ajikiri SUJ-2 blade made by Yoshida Hamono is a Japanese knife for small fish. It's fitted with an octagonal rosewood handle which is topped with a cedar ferrule. The blade is forged from SUJ-2 steel with a hardness is 63-64 HRC, which holds its edge for a long time and is very easy to resharpen.

New

Yoshida Ajikiri SUJ-2 Kuro-uchi 100 mm (3,9") [Rosewood-Cedar/Octagon]

Hayabusa Petty Aogami #2 Rainbow Damascus 150mm is a versatile Japanese kitchen knife ideal for preparing meat, fish, and vegetables. Its blade, made of Aogami #2 steel, is thin and precise. It excels in sharpness, edge retention, and ease of maintenance, but above all looks - with the unique rainbow damascus pattern!

New

Hayabusa Petty Aogami #2 Arcobaleno Damasco 150mm (5.9")

Hayabusa Santoku Aogami #2 Rainbow Damascus is a versatile Japanese kitchen knife ideal for preparing meat, fish, and vegetables. Its blade, made of Aogami #2 steel, is thin and precise. It excels in sharpness, edge retention, and ease of maintenance, but above all - looks - with the unique rainbow damascus pattern!

New

Hayabusa Santoku Aogami #2 Arcobaleno Damasco 180mm (7.1")

Hayabusa Gyuto Aogami #2 Rainbow Damascus is a versatile Japanese kitchen knife ideal for preparing meat, fish, and vegetables. Its blade, made of Aogami #2 steel, is thin and precise. It xcels in sharpness, edge retention, and ease of maintenance, but above all - looks - with the unique rainbow damascus pattern!

New

Hayabusa Gyuto Aogami #2 Arcobaleno Damasco 210mm (8.3")

Higonokami is the most famous Japanese pocket knife and enjoys the same fame worldwide as the Swiss army knife. It is a small, lightweight, and durable pocket knife of simple design, suitable for versatile use. The BRASS version is made of quality, traditional Japanese Aogami #1 blue steel, hardened to around 62 HRC.

Esaurito

Coltello tascabile Higonokami OTTONE 65mm (2,5")

30,00€
Esaurito

Hasegawa’s soft cutting boards are top-of-the-line cutting boards which are especially well suited for use with Japanese kitchen knives. Its specialized rubber surface is a great substitute for wood due to its similar characteristics: the soft surface is easy on the knives’ blades, resulting in longer edge retention.

Esaurito

Tagliere Hasegawa 600x300mm [23.6 x 11.8"]

210,00€
Esaurito

Tagliere Hasegawa Nero 440x290mm [17.3 x 11.4"]

Esaurito

Tagliere Hasegawa Nero 440x290mm [17.3 x 11.4"]

150,00€
Esaurito

Atoma Diamond sharpening stone from Japanese manufacturer Tsuboman with granulation #1200 grit is a diamond plate for the later stage of sharpening, preceded by lower granulations. A diamond stone is a great alternative for anyone who likes to save time on sharpening, as it removes material very quickly.

New

Pietra per affilare Atoma Diamond - #1200

Atoma Diamond sharpening stone from Japanese manufacturer Tsuboman with granulation #600 grit is a standard diamond plate for sharpening blades, which should be followed by higher granulations. A diamond stone is a great alternative for anyone who likes to save time on sharpening, as it removes material very quickly.

New

Pietra per affilare Atoma Diamond - #600

This cutting board is made of American walnut and oak wood. In comparison to edge grain boards, end grain cutting boards are gentler to the knife's edge and have a "self-healing" property - the wood fibers close up after they have been cut, making the board more antibacterial. Natural mineral oil (50ml) is included.

Esaurito

Tagliere a grana fine [American Walnut / Oak]

150,00€
Esaurito

Kawamura Mizu-Honyaki Gyuto is a hand-forged masterpiece. Crafted with incredible precision, it is not simply a Japanese knife but a piece of art. On one side it is adorned with Mt Fuji and a full moon, which is replaced with a crescent on the other. A stunning collector's item, this Shirogami #2 steel honyaki blade with a rainbow sheen is forged from a single piece of high-carbon Yasuki Shirogami (White Steel) #2.

Esaurito

Kawamura Mizu-Honyaki Gyuto Shirogami #2 225mm (8.6")

1.400,00€
Esaurito

Hokiyama Gyuto SRS13 Migaki 210mm (8.3") is a knife suitable for professional users and home cooks who like low-maintenance knives that offer excellent cutting performance and edge retention, while still being fairly easy to resharpen. Fitted with a unique traditional Japanese handle from oak wood.

New

Hokiyama Gyuto SRS13 Migaki 210mm (8.3") [Oak]

This Ajikiri SUJ-2 blade made by Yoshida Hamono is a Japanese knife for small fish. It's fitted with an oval rosewood handle which is topped with a cedar ferrule. The blade is forged from SUJ-2 steel with a hardness is 63-64 HRC, which holds its edge for a long time and is very easy to resharpen.

New

Yoshida Ajikiri SUJ-2 Kuro-uchi 100 mm (3,9") [Rosewood-Cedar/Oval]

This Nakiri Kyusyu SUJ-2 blade is fitted with an oval rosewood handle, topped with a cedar ferrule. A traditional Japanese knife for cutting vegetables. The blade is forged from SUJ-2 steel with a hardness is 63-64 HRC, which holds its edge for a long time and is very easy to resharpen.

Esaurito

Yoshida Nakiri Kyusyu SUJ-2 Kuro-uchi 165 mm (6,5") [Rosewood-Cedar/Oval]

140,00€
Esaurito

This Santoku Funayuki SUJ-2 blade is fitted with an oval rosewood handle with a cedar ferrule. Great for cutting smaller pieces of meat and filleting fish. The blade is forged from SUJ-2 steel, which offers incredible capacities, hardness is 63-64 HRC, and at the same time, the knife is very easy to resharpen.

New

Yoshida Santoku Funayuki SUJ-2 Kuro-uchi 155 mm (6,1") [Rosewood-Cedar/Oval]

SharpEdge stainless steel fish bone pliers, with a length of 150mm (5.9"), are designed to remove fish bones effortlessly and quickly. The precise curved tips open up to 80mm wide and offer great precision and reach when removing those pesky fishbones even from deep within the fillet.

New

Pinza per lische di pesce SharpEdge [curved] - 150 mm (5,9")

Hand-forged to perfection by master artisans of Tojiro Atelier. The dark kurouchi blade finish gives the blade a natural rustic appearance. The 63 layers of softer steel are visible in a gentle damascus pattern. Stainless VG-10 steel core was hardened to 61 HRC. Fitted with an octagonal cedar handle with ebony ferrule.

New

Tojiro Petty Atelier VG-10 Kuro-uchi Damasco 150mm (5.9")

Kurosaki Petty Fujin is a uniquely looking blade from the talented Yu Kurosaki. Petty is a small kitchen knife perfect for all those delicate tasks where a larger knife is deemed unwieldy. Core from SG2 powder steel is enveloped in softer steel with a striking tsuchime pattern. Fitted with an octagonal rosewood handle.

New

Kurosaki Petty Fujin SG2 150mm (5.9")

Saji Petty R2 Ironwood 130mm is not just a looker. The core is made of powder R2/SG2 steel, tempered to around 63 HRC, and clad into layers of rust-resistant stainless steel which creates a unique damascus pattern. The knife is stored in a traditional Japanese wooden box with burned Saji trademark kanji on top.

Esaurito

Saji Petty R2 Ironwood 130mm (5.1")

420,00€
Esaurito

The Sentan Chinese Cleaver Shirogami #2 200mm is quite light for a Chinese cleaver. As for steel, the blacksmith opted for Shirogami #2 (White) steel, with a hardness of 60 HRC. Suitable for vegetables, as well as slicing raw fish and meat, but not bones. It boasts a rustic kurouchi finish and a round wooden handle.

New

Mannaia cinese Sentan Shirogami #2 200mm (7,9")

1
2