Nigara Bunka SG2 Tsuchime Wa 180mm (7.1")

Nigara Bunka SG2 Tsuchime Wa 180mm is a multi-purpose Japanese kitchen knife, suitable for preparing meat, fish and vegetables. Its SG2 powder steel core insures long-lasting sharpness with little to no maintenance, as the steel resists corrosion very well.

It has all the advantages of the traditional bunka blade shape:
→ a gently designed belly of the blade suitable for making either long or short cuts,
→ a flat back side of the blade,
→ and a thin pointy reverse tanto tip for precise cuts and carvings.

The hollow grind geometry of the blade, combined with the unique hammer strokes, ensures that ingredients do not stick to the blade during cutting, allowing for faster and more precise work.

BLADE SHAPE:
The 180 mm long bunka is a versatile kitchen knife that excels at all types of chopping and cutting on the cutting board. The blade is finished with a "K-tip" tip, typical of Japanese swords and daggers. Its flat profile allows for efficient chopping and slicing, while the curved edge enables smooth rocking motions for precise mincing and dicing.
*The length of the cutting edge is 165mm (heel to point), but with this knife the length is measured from the edge of the handle to the tip of the blade, amounting to 180mm.

STEEL:
SG2 steel is a powder steel, renowned for its hardness and subsequent edge retention—due to a high carbon (C) content of 1.5%. The steel is also high in chromium (Cr)—around 15%, which adds to corrosion resistance and Molybdenum (Mo) that improves the blade’s wear resistance. SG2 steel blades will be able to achieve a fine sharpness due to the fine microstructure of the steel and will keep it—without having to worry about maintenance and corrosion.

LAMINATION:
A high hardness of around 64 HRC means that the blade won’t be very tough, so the blade’s core was laminated using the san-mai method to improve its structural integrity and subsequent ability to withstand impacts and prevent chipping. San-mai translates to “three layers” in Japanese, referring to a blade that is composed of a primary, inner layer of harder steel (hagane) and of two secondary, outer layers of softer steel (jigane) that protect the prior.

GEOMETRY:
It has a double bevel (symmetrical) blade with convex (full hamaguri) grind. Hamaguri grind allows superior sharpness that requires delicate handling and helps to prevent food from sticking to the blade. Such a shape keeps a lot of metal behind the edge and makes for a stronger edge, yet it still allows a good degree of sharpness. The downside to a convex grind is that it is very hard to reproduce by anyone other than a very experienced sharpener.

BLADE FINISH:
The surface of the blade was treated with a special textured hammer, leaving complex geometric impressions on its upper part. The Japanese hexagon hammered finish on knives is a stunning technique that involves skillfully hammering the blade's surface to create captivating hexagonal indentations.

The tsuchime surface helps to reduce friction and prevents food from sticking to the blade during cutting. The textured surface creates small air pockets which allow for smoother and more precise cutting.

HANDLE:
The Japanese handle (Wa) is made of teak wood with a buffalo horn ferrule. Suitable for both left and right-handed users. With the choice of the shape and the wood, the handle embodies a simple Japanese aesthetic.

BLACKSMITH:
Nigara Hamono has a 350-year history, making swords since the Edo period. Head blacksmith Tsuyoshi Yoshizawa, who works alongside his father Toshi Yoshizawa, is an eighth generation blacksmith with a passion for art and music as well as knives, and his famous Nigara Anmon design is the result of his love of Andy Warhol’s artwork. Nigara is easily one of the most special knife makers in Japan.